SUPPORT
Track Order
Add Your Review 
Description
The In-Line Amplifier for Satellite DBS LNB 2.5 GHz (950-2400 MHz) is designed to enhance and stabilize satellite signals over long cable runs. By amplifying weak satellite signals before they reach the receiver, this amplifier ensures high-quality reception, even in challenging environments. It operates within the 950-2400 MHz frequency range, which is the standard for satellite communication, particularly for Direct Broadcast Satellite (DBS) systems.
| Specification | Detail |
|---|---|
| Frequency Range | 950 – 2400 MHz |
| Maximum Input Frequency | 2.5 GHz |
| Gain | 12-20 dB (varies by model) |
| Noise Figure | Typically < 4 dB |
| Impedance | 75 Ohms (F-Type connectors) |
| Power Requirement | DC pass-through (from satellite receiver) |
| Connector Type | F-type (female) |
| Weatherproofing | Weather-resistant housing for outdoor use |
| Insertion Loss | Less than 1 dB |
| Operating Temperature | -30°C to +60°C (-22°F to +140°F) |
| Dimensions | Compact and lightweight design (varies by manufacturer) |
Installation Considerations:
- Placement: The in-line amplifier should be installed midway between the satellite dish and the receiver to maximize its efficiency. If cable runs exceed 50 feet, placing the amplifier closer to the dish often yields the best results.
- Power Supply: Ensure that the satellite receiver can provide sufficient DC power for the amplifier through the coaxial cable. Some amplifiers may require a separate power supply if the receiver does not provide adequate voltage.
- Signal Testing: After installation, it is advisable to test the signal strength using a satellite meter or the signal meter on the receiver to ensure the amplifier is providing the desired boost.
This in-line amplifier is an excellent choice for anyone facing signal degradation issues in their satellite system, ensuring clear and stable satellite reception for both standard and high-definition broadcasts.
Reviews
There are no reviews yet.